Nikon D810 and D810A - two camera control

[Dunmunro]

I have tested the Nikon 1.10 driver and I can control a D810 and a D810A simultaneously using two instances of AA7 32bit (non LAA). I had an ASI 120mm mini using ASCOM running in instance one at the same time.

[fabdev]

Thanks, may you test with LAA too?
For 20+ megapixels DSLRs, LAA can be useful.

[Dunmunro]

Thanks, may you test with LAA too?
For 20+ megapixels DSLRs, LAA can be useful.

You're welcome.

I'll try the LAA version tomorrow.

[Dunmunro]

OK. I tried the LAA version of AA7 and connected the D810A as camera 1 in AA7 instance 1 and the D810 as camera 2 in instance 2 and it worked fine in test mode, with both cameras exposing simultaneously.

[Dunmunro]

Would it be possible to add D800 and D800E support to the driver?

I'd be happy to test it ASAP.

thanks

[fabdev]

Hello, OK, I will try to make a version for it. Please write me by PM or email.
Fabio.

[Dunmunro]

The Nikon D800 and D800E were successfully tested with the modified Nikon 1.1 driver.

thanks Fabio.