flat frames problem

Cameras, telescopes, focusers and other hardware
Post Reply
maplearn
Posts: 10
Joined: 11 Jan 2021, 06:02

flat frames problem

Post by maplearn » 17 Jan 2021, 09:24

Trying to take flats and they are split in the middle with different shades. Can someone help? No problem with the camera, takes proper flats with other software.
flat frame.jpg
Top
maplearn
Posts: 10
Joined: 11 Jan 2021, 06:02

Re: flat frames problem

Post by maplearn » 17 Jan 2021, 12:26

figured it out. the guide camera is confusing the software. I installed two separate ZWO camera for photos and guiding. The software senses them correctly but but the image is mixing the two. Actually I had the same problem with other software including ZWO's own software, ASI. Has anyone else had this problem and resolved it?

Ernie
Top
Iver
Posts: 113
Joined: 08 Jan 2019, 04:32
Location: Monterey county, Ca.

Re: flat frames problem

Post by Iver » 17 Jan 2021, 21:01

This happens even if you select the imaging camera as 1 and the guider as 2 ?
Iver
Top
maplearn
Posts: 10
Joined: 11 Jan 2021, 06:02

Re: flat frames problem

Post by maplearn » 17 Jan 2021, 22:50

yes
Top
fabdev
Posts: 500
Joined: 03 Dec 2018, 21:43

Re: flat frames problem

Post by fabdev » 18 Jan 2021, 14:21

Only an updated ASI ASCOM driver could solve the problem. Maybe it's fixed yet, verify the latest version on the ASI web site. Some months ago there was a discussion about this also on the ASI forum.
Some hints by the way: don't use a USB hub, connect the two cameras in a given order, both physically and by software. Just a try.
Top
Post Reply

Return to “Instrumentation”