Selected guide star not showing in Guide Window

[mpmayer0416]

I’m using a QHY5iii485 guider cam and trying to do auto guiding in AA 8 SP2 with the ASCOM camera setup. As shown below, when I select a star in the guide camera image it’s not showing up in the Guide Window. It used to show up as it should. Something has changed somewhere and I’m having no luck solving this issue. Your help would be greatly appreciated and have a great day…

Best Regards,

Michael Mayer
Pittsford, Vermont, USA


PastedGraphic-1.tiff

[Dunmunro]

I’m using a QHY5iii485 guider cam and trying to do auto guiding in AA 8 SP2 with the ASCOM camera setup. As shown below, when I select a star in the guide camera image it’s not showing up in the Guide Window. It used to show up as it should. Something has changed somewhere and I’m having no luck solving this issue. Your help would be greatly appreciated and have a great day…

Best Regards,

Michael Mayer
Pittsford, Vermont, USA


PastedGraphic-1.tiff

I think you need to check the visualization settings. You can probably test this using the simulator.

[mpmayer0416]

Thank you very much for your suggestion. I will get on that right away to see if I can find a solution to this issue. Have a great day!